| 1.8" - 4" range w/ SPC Output
FEATURES:
The minimum value holding function provides the easy detection of hole diameter.
Up to three sets of master value and upper/lower tolerance value can be memorized.
An analog bar indicator is integrated to enhance the intuition in reading.
GO/±NG judgment is performed by setting the upper and lower tolerances.
Up to four rods (250mm or 500mm) can be used.
Technical Data Accuracy: Wide Range: 0.003mm / .00012 Narrow Range: 0.002mm / .00008 (Excluding Quantizing Error) Resolution: .00005" / 0.001mm Display: LCD Battery: SR44 (1 pc.) (938882) Battery life: Approx. 9 months for normal use Dust/Water protection level: Conforming to IP53 Functions Origin-set, Zero-Setting, Presetting, Power on/off, inch/mm conversion (inch/mm type only), Data output, GO/±NG tolerance judgment Alarm: Low battery voltage, scale contamination, over-flow error, tolerance limit setting error Optional Accessories 21DZA089: Extension rod 250 mm (10") 21DZA081: Extension rod 500 mm (20") 516-118-10: Origin setup metric rectangular gage block set 516-119-10: Origin setup metric square gage block set 905338: SPC cable (1m) 905409: SPC cable (2m)
511-521 | 
